BobbyMillar
New Member
Hi TheCookies, did the connector you linked before fit?
I've just done the same to my van washing down bikes.
Bobby
Last edited:
Buy all your Marco Polo Accessories at the Club Shop Visit Shop
Rear Shower
- Thread starter GeorgeG
- Start date
I've just done the same to my van washing down bikes.
Bobby
BobbyMillar
New Member
Hi All
I eventually spent some time tracking down the correct part to replace the in-line valved connector for the shower/hose outlet. The ones previously posted from RS were close but not correct. As ever the part is hard to come by (~1month delivery as not held in stock). I found it at:
www.tom-parker.co.uk/products/brass-and-plastic-couplings/2/multi-mount-series/65/coupling-inserts/164/14-flow-valved-hose-barb/21097/cplmd220-06/
Part number:
cPLMD220-06
CPC 1/4" FLOW - VALVED - HOSE BARB (TUBING SIZE: 3/8" ID, METRIC EQ.: 9.5 mm ID)
£18.16 + £10 delivery - expensive so ill try hard not to snap it again washing the MTB's!
I eventually spent some time tracking down the correct part to replace the in-line valved connector for the shower/hose outlet. The ones previously posted from RS were close but not correct. As ever the part is hard to come by (~1month delivery as not held in stock). I found it at:
www.tom-parker.co.uk/products/brass-and-plastic-couplings/2/multi-mount-series/65/coupling-inserts/164/14-flow-valved-hose-barb/21097/cplmd220-06/
Part number:
cPLMD220-06
CPC 1/4" FLOW - VALVED - HOSE BARB (TUBING SIZE: 3/8" ID, METRIC EQ.: 9.5 mm ID)
£18.16 + £10 delivery - expensive so ill try hard not to snap it again washing the MTB's!