Cant find thin airline rail rubber insert for the floor

[alexl]

Hello guys! It seems impossible to find those thin long floor rail rubber inserts. They do have many names and also many online places selling those 2-5cm rubber covers but none is selling those thin ones, like 10mm wide and around 2 m long ones. Here u see both types, the one cover and the pair thin ones on every rail being covered by the thick one. Anyone happen to know articlenr or maybe have the a better alternatives to suggest?

https://cdn1.1sternehotel.de/item/images/34142/full/Mercedes-Marco-Polo-Zubeho--r-Shop-1sternehotel-alles-fu--r-den-Mercedes-Marco-Polo-Mercedes-Benz-V-Klasse-Marco-Polo-Abdeckleiste-Sitzschiene--Mercedes-Benz-Original-Teile-.jpeg.avif

I believe the thick one have articlenr A63968409187C45.
BR
Alex

 

[MarioF]

Something like this: https://daimler-truck-shop.de/en/Me...Benz-Cover-seat-rails-MA639-684-09-18-7C45-So

 

[alexl]

Hi. I have seen this link before. It appears to be about the thick one, around 2cm wide this link is selling. But its the thin ones, two of which per rail, covered by that thick one, that i wonder about.

 

[MarioF]

Hi. I have seen this link before. It appears to be about the thick one, around 2cm wide this link is selling. But its the thin ones, two of which per rail, covered by that thick one, that i wonder about.

I'm not really sure which ones you mean.

 

[P1UXY]

i think you mean these. In which case i have the same issue and can’t find them. Maybe they come with the rail ?

 

[P1UXY]

 

[Van Diesel]

ask a merc dealer maybe..

 

[Steve B]

Mine have stretched as well, so would be interested in sourcing a replacement

 

[Pete S]

I bought this by the metre and am pleased with the result.
https://koller.co.uk/products/rails-bonded-floors/rail-cover-strip-per-metre/

 

[Dense]

The original 10mm wide sections are MB part number A4479850000 and are called ‘Cover Profile’.
They come in a roll about 2.6m long (that is enough to do one side of one rail) and at £25.80 from MB, I just replaced the one I had that was torn.
Now I know the part number can find them cheaper on Ebay
They are clamped in place at each end by the plastic end caps which have a lug that goes through the rubber. I just replaced one without removing the seat by sliding it to the end and loosening the bolts holding down the other end of the rail enough to lift it and remove the cap.