Camping Gaz Adapter and Regulator

[Dr Crill]

Hi
I am seeking help on the type of adapter needed for the 907 bottle.

Just taken delivery of new van. It is a goose chase to get the gas safely plumbed in.

The regulator is a GOK model. It’s made in Germany. Southampton Calor stock them ( they’re v expensive comparatively). They tell me that the Gok regulator needs a Gok adapter to go on a 907 bottle because otherwise there will not be a proper seal. Apparently, there should be a washer on the GOK adapter which the regulator but can bite into.

It seems obtuse the vehicle is not supplied with a GOK adapter to complete the seal of the system and to enable the purchaser ifs 50-60k van to just drop a bottle in , tighten it and get off camping.

Can anyone help ?

Have other purchasers all had an adapter made by GOK supplied with the vehicle ?

Alternatively, is there a safe third party adapter which people have had to use?

Cannot quite Credit the colossal inconvenience of sorting out the correct adapter.

Any observations or pictures of a GOK adapter in a907 bottle most welcome.

Darrel

 

[WILLH]

I was just able to screw my bottle in when I bought my van-no extra valves/adaptors etc were required

 

[Dr Crill]

Thanks

That sounds like the common sense position applies: the van should have been supplied with matching GOK regulator and adapter.

Attached is the missing adapter which can indeed just be screwed in the bottle if it is attached to the GOK regulator which is fixed within the plastic gas tank.

https://www.socal.co.uk/p/GOK0973600/cylinder-adaptors/gok/gok-gaz-g3-adaptor

 

[Steven rhodes]

I can confirm mine just screwed straight on to the 907 bottle also

 

[GeorgeG]

+1

 

[Wilnx005]

If anyone needs a replacement we've sourced the regulator and tap (genuine) here - https://shop.marcopoloownersclub.com/product-category/marco-polo-essentials/